RM0209 4U ATX/PB Rackmount Chassis Quick Installation Sheet
1. Remove the RM0209 4U Chassis from the shipping box. Please be careful, the chassis weights over 35 Lbs.
2. First, remove the four screws on both side of the chassis. (See picture below)
3. Next, take off the chassis cover. (See picture below)
4. Remove the clamp down bar by removing the two screws showed in picture below.
5. To install Harddisks and CDROM, removing the four drive cage screws showed in picture below. Use the drive cage unit for harddisks and CDROM installation.
6. A RM0209ATX 4U chassis internal view without the drive cage unit,
7. A Front chassis view without the drive cage unit.