RM0120 1U ATX Rackmount Chassis Quick Installation Sheet

1. Remove the RM0120 1U Chassis from the shipping box. Please be careful, the chassis weights over 35 Lbs.

2. First, remove the two screws from each side of the chassis. (See picture below)



3. Unscrew the two thumb-screws from the rear side of the chassis. (See picture below)


4. Remove the chassis cover.


5. Internal view of RM0120 1U ATX rackmount chassis.


6. Removing the 5.25" bay panel by loosen the two thumb-screws on the side of the drive bay. (See picture below)



7. To install hard disks, un-screw the two harddisk trays from the front of the chassis. .


8. Done.